Description

TaiYue Aluminum Foil XPE Foam Reflective Thermal Insulation is a reflective thermal insulation material made with a closed-cell cross-linked polyethylene foam core and aluminum foil facing. The reflective surface helps block up to 97% of radiant heat, while the XPE layer slows heat transfer through conduction and convection and provides added moisture resistance.

Fire-retardant XPE grades meets Australian testing & certification standards ,are available for building applications. Suitable for roofs, walls, floors, warehouses, metal and steel buildings, workshops and prefabricated structures, the material is lightweight, flexible and easy to handle on site. As an XPE insulation manufacturer, TaiYue supports full customization and OEM/ODM production for distributors, contractors and project buyers.

Key Product Features

1. Closed-Cell XPE Foam Core:

Made with cross-linked polyethylene foam, the closed-cell structure provides stable thermal insulation performance, moisture resistance and good dimensional durability for building and industrial applications.

2. High Radiant Heat Reflection:

Pure aluminum foil facing reflects up to 97% of radiant heat, helping reduce radiant heat transfer through roofs, walls and other building envelope systems.

3.Thermal Performance & Fire-Retardant Options:

The XPE foam layer helps reduce heat transfer through conduction and convection. Material R-value can reach approximately R-2.7 based on 6.5 mm thickness, depending on product structure and installation conditions. Fire-retardant XPE grades are available for different project requirements.

4. Versatile Building Applications:

Suitable for roof, wall and floor insulation in metal & steel buildings,timber & wooden buildings, warehouses, Factorys & workshops, sheds & prefabricated structures and other commercial or industrial structures.

5. Temperature Resistance & Long-Term Use:

Designed for operating temperatures from approximately -50°C to 80°C. With proper installation and application conditions, the material is designed for long-term insulation performance and a service life of 10+ years.

6. Lightweight & Easy to Install:

Flexible XPE insulation rolls can be easily cut, joined, taped or mechanically fixed using common installation tools, helping simplify handling and installation on construction sites.

Product Specifications

Manufacturer Support

TaiYue has specialized in aluminum foil thermal insulation manufacturing since 2002. With 10+ production lines, we supply more than 400 containers annually to customers in 100+ countries and regions. Factory-direct production supports stable supply, OEM/ODM customization and consistent quality for distributors, importers and project buyers.

Lead Time

Standard production lead time is typically 20–30 working days, depending on order quantity, specifications and customization requirements. Priority production can be discussed for urgent orders.

Sample Support

Free material samples are available for quality and specification evaluation. Courier costs are paid by the buyer. Mass production is controlled according to the confirmed specifications and approved sample.

FAQ

1.What are the main function of your “Aluminum Foil Insulation”?

Its main functions include thermal insulation, radiant heat protection, energy saving, and moisture resistance.They can provide a temperature difference of 3-9°C for you.

2.What are the main application of your “Aluminum Foil Insulation”?

They are mainly Designed for roof, wall and floor insulation, widely used in metal and steel buildings, timber & wooden buildings,warehouses, factories, workshops, prefabricated houses and other commercial construction projects.

3.What is the working principle of your “Reflective Aluminum Foil Thermal Insulation Material”?

There are three modes of heat transfer: Radiation, Conduction and Convection.

The aluminum foil on the surface of our insulation materials reflect radiation, and the bubble or foam in the middle slows down heat conduction and heat convection, achieving excellent thermal insulation performance.

It is one of the most advanced and widely popular building insulation materials on the market today.

4 .What is the difference between “pure aluminum foil”, “metallized aluminum foil” and “white film” surfaces? And what is the reflectivity of each material?

We usually use pure aluminum foil, which has 97% reflectivity, fire retardant and long service life for better performance. We highly recommend our customers choose it.

Meanwhile, we can also use metalized aluminum foil , which has 90% reflectivity.Its performance is not as good as pure aluminum foil, and it is not fire retardant, but it is more affordable.

White film is a PE film. It does not have the reflective properties. Its mainly used to protect the insulation core,provide a clean and attractive appearance.

5. Can you provide full customization and OEM & ODM services?

Yes, we offer comprehensive customization services, including product sizes, thickness, surface materials, colors, printing, packaging, labels, and more. We will work closely with you to develop a solution that meets your specific requirements and helps you achieve your goals.And OEM & ODM services are available.

6. How do I choose the right structure and thickness?How can I get a quotation? Can I get samples?

Please consult our sales team. Based on your requirements and local market preferences, we will recommend the most suitable product structure and thickness for you.Then We will provide you with an accurate quotation based on your required quantity, any specific requirements you may have, and the associated local charges.

And we would be happy to send you samples for your reference. We promise the quality of mass production will be exactly the same as sample.

7.Are you a factory or trading company?

We are a professional manufacturer established in 2002. Our factory is located in Qingdao, Shandong Province. With decades of mature production experience, we deliver reliable quality and competitive factory-direct prices.

8.What is your production lead time?What is your payment terms?

The production lead time depends on structure and quantity, usually 15-25 working days after we receiving the deposit.

And the payment terms we generally accept are : 30% of total amount as deposit, and 70% balance before shipment.

XPE Foam Foil Insulation: Technical and Purchasing FAQ

Detailed Product Information

Cross-Linked Foam with Reflective Aluminum Foil Facings

XPE foam foil insulation is a flexible composite for building projects that specify a cross-linked polyethylene core. TaiYue’s reference construction places this closed-cell foam between pure aluminum foil surfaces. The foam and facings form one roll, making it practical to measure, cut and position as part of a roof, wall or floor installation.

Cross-linking joins polymer chains within the foam structure. For a buyer, that material distinction should be carried through the quotation, approved sample and order description. “Polyethylene foam insulation” is too broad when the project calls specifically for XPE. Foam grade, thickness and surface construction remain important, even when two rolls look alike.

This product is offered for metal and steel buildings, timber structures, warehouses, workshops and prefabricated construction. Its value in a particular project comes from matching the laminate to the building detail. Distributors can develop a defined XPE range around local specifications, with separate references for standard or fire-retardant grades and selected surface finishes.

Image position 1 — XPE core and foil laminate

Reserved for your actual XPE cross-section photograph.

Suggested ALT: Cross-section of closed-cell XPE foam laminated between aluminum foil facings

Silver and Anti-Glare Faces: Specify Each Side

The pure aluminum foil surface listed for this product has reflectivity up to 97%. Treat this as a property of the specified surface rather than a percentage reduction in a building’s total heat gain. The XPE core contributes resistance to conductive heat flow, while a reflective face reduces radiant heat exchange when it faces an appropriate air space.

For roof and wall enquiries, TaiYue can discuss anti-glare surface options alongside the foam specification. An anti-glare finish addresses surface glare during handling and installation. Record its colour, location and appearance on the approved sample, and request thermal surface data for the selected finish. The reflective properties of an untreated silver face should not automatically be assigned to a treated face.

An importer’s specification can identify the faces as Side A and Side B, with an accompanying photograph or drawing. This is particularly helpful where printing or adhesive backing is also requested. It gives production staff, warehouse teams and installers a consistent reference for which surface goes where.

Read Thermal Data in the Context of the Assembly

Material R-value and total assembly R-value answer different questions. An assembly result may include the foam laminate, adjacent air spaces and other building layers. Heat-flow direction also affects reflective-system results. Ask for the assembly drawing and calculation or test basis before using a quoted value in a specification.

The reference product above is 6.5 mm thick. When discussing a different thickness or facing, request data applicable to that selection. For comparisons between suppliers, put the values on the same basis: units, product construction, air-space arrangement and heat-flow direction. This provides a more useful comparison than placing two headline R-values side by side.

Selecting Fire-Retardant XPE for a Defined Requirement

TaiYue offers fire-retardant XPE options for customers with specified project requirements. Identify that requirement before sample approval so the proposed foam grade and facing construction can be reviewed together. A report for one combination of materials should not be assumed to cover every thickness, coating or adhesive variation.

For an Australian enquiry, send the required test method or project specification with the requested roll details. Ask for the report reference, sample description and reported classification. Where the existing product information uses a short classification label, review the underlying document to understand exactly what was tested. This keeps the purchasing discussion tied to the supplied laminate.

Roof and Wall Details That Influence Product Selection

Metal roofs. Establish the position of the XPE roll relative to the roof sheet, purlins or battens, and interior lining. Show the intended air spaces and support points on the section drawing. Confirm how the sheet will be held while adjacent layers are installed, especially at roof edges and around openings.

Steel and timber walls. Plan continuous runs around corners, windows and doors. The designer should identify the required vapour-control role and the position of the insulation within the wall. A moisture-resistant laminate still needs compatible joints and a suitable drying strategy for the climate and construction.

Floors and prefabricated units. Match the roll to the actual assembly and access available for installation. If the foam will be compressed between components, request the relevant compression and thermal information. A flexible foam roll should not be given a load-bearing function simply because it is used within a floor.

Image position 2 — XPE roof or wall section

Reserved for your installation drawing showing the selected facing orientation.

Suggested ALT: XPE foam foil insulation in a metal roof section showing the foil face, supports and adjacent air space

How XPE Compares with Other Foil Insulation Rolls

EPE foam foil insulation is another continuous-foam option in TaiYue’s range. Use the project’s specified core material as the starting point. Where alternatives are allowed, compare approved samples and supporting data rather than assuming that all polyethylene foams provide the same mechanical or fire performance.

Double bubble foil insulation has formed bubble layers in place of the XPE core. The choice changes the internal structure and product specification. Evaluate it against the required installation detail, selected facings, roll format and documented thermal performance.

Customers looking specifically for a woven substrate can also review anti-glare woven fabric foil sarking. That construction belongs to a different product group. An anti-glare surface describes a finish; it does not make a woven laminate and a foam laminate interchangeable.

Cutting, Joining and Protecting the Laminate

Prepare the layout before unrolling the material. Identify joints, openings and changes in direction, then cut sections with suitable tools on a clean surface. Avoid stretching the laminate to make an undersized piece fit. Keep the selected faces identifiable throughout installation, particularly when the two sides have different finishes.

Use the agreed overlap, compatible tape and fixing method for the construction detail. Protect foil surfaces from sharp framing edges and repair accidental damage as instructed. Keep foil clear of exposed electrical wiring. Before closing the assembly, inspect joints, penetrations and the specified air spaces while they are still accessible.

For storage, retain the roll labels and protect the material from contamination or physical damage. Keep different foam grades and facing combinations separately identified. A marked product reference is useful for both a contractor handling several specifications and a distributor managing repeat deliveries.

Roll Planning, Sample Approval and OEM Supply

The listed 1.35 m by 22.25 m format contains approximately 30 m² of material. Installed coverage depends on the layout, overlaps and trimming. Agree the roll dimensions with the installer before using nominal area to calculate the order; custom widths and lengths can also be discussed.

For wholesale XPE foam insulation, sample approval should cover the foam grade, thickness, both facings and any anti-glare treatment. Add printing, labels, packaging and adhesive backing to the approval record where required. Keep the sample reference linked to the written specification so a repeat order identifies the same construction.

Image position 3 — XPE production and bulk supply

Reserved for your XPE insulation production-line or finished-roll photograph.

Suggested ALT: TaiYue XPE foam foil insulation rolls on the production line before export packing

TaiYue has manufactured aluminum foil thermal insulation since 2002 and supports OEM and ODM orders for importers, distributors, wholesalers and project buyers. Send the destination market, intended application, required construction and quantity to start a product review. If the order depends on a particular report or classification, include it with the initial enquiry.

Request an XPE foam foil insulation bulk quotation with your roll sizes, surface options and packaging requirements. Drawings and an existing product sample can help define a suitable specification for evaluation.